Accu-Chek Softclix Uživatelský manuál stáhnout pdf (Strana 51)

Checking the Accu-Chek Compact Plus meter

 Hold the front edge of the test strip to the drop of control solution.

The test strip draws up the control solution via the black notch.

When the test strip has drawn up sufficient control solution, the meter

beeps (provided the beep tone is turned on), the test strip symbol disap-

pears and the blood drop symbol stops flashing. Measurement starts

automatically and 000 appears in the display.

 Withdraw the test strip from the control solution.

Measurement takes approximately 5 seconds. As measurement

progresses, the three 000 disappear in turn from the display.

On completion of the test, the result appears in the display. The meter

automatically saves the result to memory.

 If you are using Accu-Chek Compact Autocontrol solution:

The meter automatically detects that you have applied control solu-

tion. The bottle symbol appears in the display when measurement

starts. The bottle symbol is saved along with the result to identify it

as a quality control result.

If the bottle symbol is not displayed:

 Press the S button twice when the result is displayed.

The bottle symbol appears in the display.

 If you are using Accu-Chek Compact Control solution:

The meter does not automatically detect that you have applied con-

trol solution. When the result is displayed, you can flag it retrospec-

tively as a quality control result.

 Press the S button twice when the result is displayed.

The bottle symbol appears in the display.

To remove the bottle symbol:

 Press the S button once.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 81 82

Žádné komentáře

Accu-Chek Softclix Uživatelský manuál Strana 51